Upgrades

Release notice for Ingate Firewall® 6.1.1 and Ingate SIParator® 6.1.1

The new version can be found here

Release notice for Ingate Firewall(R) 6.1.1 and Ingate SIParator(R) 6.1.1

Release name: Ingate Firewall(R) 6.1.1
              Ingate SIParator(R) 6.1.1
Release date: January 31, 2018

The new version and User Manuals can be found at:
https://www.ingate.com/Upgrades.php

This is a minor release with new features and enhancements.
We recommend everybody to upgrade.


* SIP related issues **************************************************

*** Allowed Media Ports.
    Possible to specify which media ports are allowed in the SDP.
    Only applicable to media relayed by the unit.
    Defaults to ports above 1024.
    See "SIP Services" > "Sessions and Media" > "Allowed Media Ports".

*** Support DTMF to SIP INFO conversion on the SIP Trunk page.
    Converts DTMF from the media layer (RFC 2833/RFC 4733) to the
    signaling layer (SIP INFO).
    Conversion from signaling to media is not supported.

*** Support adding SSRC to the SDP if none exists and rewrite the
    corresponding RTP/RTCP packets.

*** Add the SIParator type 'Manual'.


* Other issues ********************************************************

*** Port Allocation Ranges
    Support configuration of the local ports used by the unit for
    outgoing connections. This allows using ports that were
    previously fixed e.g. for SIP media ports.
    See "Basic Configuration" > "Advanced" > "Port Allocation Ranges".
    NOTE!
    If you use a "SIP Media Port Range" within the interval 1024-32767
    you must change the media port range before you can upgrade.
    Afterwards, you can change the "Auto" port range and reuse your
    old media ports.
    See "SIP Services" > "Basic" > "SIP Media Port Range".

*** Support accessing the failover standby unit's web interface from
    the active unit.
    The team must be operational before you can access the standby unit.
    No configuration changes can be made on the standby unit.
    The active and standby units can be separately upgraded without
    leaving the failover team.
    See "Failover" > "Standby Unit Access Relay".

*** Support joining an existing failover team from the web interface.

*** Add support for encryption of failover communication (including
    configuration transfers) between the active and the standby unit.

*** Fetch licenses directly from the web interface.
    Your browser must have Internet access.
    You need a license code (XXXX-XXXX-XXXX) and the credentials
    for your account at https://account.ingate.com/.
    See "Administration" > "Upgrade" > "Fetch Licenses".

*** Add support for DTLSv1.2 in the Media Proxy.

*** Add support for adding and removing network interface cards on
    Software Ingate virtual machines.


* VPN & IPSec ********************************************************

*** Add support for XAUTH (with PSK) and Mode Configuration.

*** Add support for specifying Local and Remote ID.

*** Add support for Random ECP Diffie-Hellman groups 19, 20 and 21.

*** Add support for IKE version 2.